For outputs of 1000 to 8000 Kr/hr
Pyro’s range of medium-sized gas-fired ovens are used if the mode of heating is preferred to electrical. Delivering the same superior productivity and performance, applicable for a wide array of applications with a compact footprint, these gas-fired ovens are high in efficiency and in yield.
Features & Specifications
| Model | P-1611G | P-1615G | P-2015G | P-2415G | P-2420G |
|---|---|---|---|---|---|
| Chamber size (WxLxH) | 405 x 3355 x 150 | 405 x 4575 x 150 | 510 x 4575 x 200 | 610 x 4575 x 205 | 610 x 6100 x 205 |
| Overall size (WxL) | 965 x 4520 | 965 x 5995 | 1070 x 5995 | 1680 x 5995 | 1680 x 7620 |
| Capacity/hour | 310°C, 2000kg | 370°C, 1520kg | 420°C, 1225kg | 310°C, 3710kg | 370°C, 2925kg | 420°C, 2450kg | 310°C, 3565kg | 370°C, 2780kg | 420°C, 2305kg | 310°C, 7480kg | 370°C, 6000kg | 420°C, 5105kg | 310°C, 7410kg | 370°C, 5930kg | 420°C, 5035kg |
*Higher output available
Special Applications – Tempering of Induction Hardened Parts, Tempering of Crankshafts
Applications
Stress Relieving
Pyro’s reputation for valve spring expertise started with General Motors in 1997. GM purchased a Pyro electric oven, which allowed them to reduce cycle time from 35 to 9 minutes, from coiler to the end of conveyor. Moreover, with a much shorter preheat time of 10 minutes compared to the 45 minutes for a conventional oven, GM increased available production time by almost 4 weeks per year, and achieved considerable energy savings.
Tempering
Another Pyromaitre success story concerns tempering of hydro-formed torsion tubes. The conventional process was a 60-minute continuous batch process with an incredible 1056 parts per batch. The lean solution delivered on three different continents uses a 10-minute process with only 60 parts. This high-speed processing provides the opportunity for single-piece workflow thus eliminating part fixtures and external handling equipment. Additional benefits include a simplified and more robust robotics program and significantly reduced capital investment.
More about Medium Gas Fired Continuous Furnace
» Springs
» Suspension springs
» Torsion springs
» Wire forms
» Valve springs
» CV Joints
» Leaf Springs
» Shafts
» Torsion tubes
» Crankshafts
» Induction hardened parts
» Springs
» Suspension springs
» Torsion springs
» Wire forms
» Valve springs
» CV Joints
» Leaf Springs
» Shafts
» Torsion tubes
» Crankshafts
» Induction hardened parts